Polyelectrolyte
Cationic Poly Electrolyte
The Cationic Poly Electrolyte is utilized for dewatering organic slush from human waste, sewage and industrial effluents. This powdered form flocculant is formulated by making use of finest quality polyacrylic ester to ensure exceptional treatment effects in the combination of inorganic flocullants..
Key Features and Benefits
- Economical to use-effective at very low dosage levels.
- Perform well over a wide pH range.
- Improve throughput and cake solids.
- Achieve high solids capture.
- Easily sealable in water.
- Dry product minimizes storage requirement.

Poly Electrolyte Cation is recommended for the following solid-liquid separation process:
- Belt filter, centrifuge, screw press dewatering- increased production rate, cake solids and solids capture.
- Water clarification – improves influent, process and effluent water quality by reducing suspended solids and turbidity.
- Dissolved air flotation – result in cleaner subnatants, increased float solids and greater throughput.
- Filtration – improve filtered water quality and plant throughput.
The above are the primary applications for this product. This product may be beneficial in any solid-liquid separation process.
Poly Electrolyte Cationic dry PAM cationic flocculants should be properly dipersed and dissolved to 0.1-0.5% concentration. Dissolution should be completed around 1 hour of agitation, but will be faster in warm water. However, the temperature of watershould be refrained from above 500 C.
Air Flotation Flocculants : 0.1~ 5.0 ppm
Thickening Flocculants : 0.1~ 5.0 ppm.
Dewatering Flocculants : 0.1~ 1.0 ppm
Proper human safety products such as Splash goggles, lab coat, vapor respirator, gloves and boots should be worn while handling and applying chemicals. Splashes on skin should be washed off with water immediately. In case of splashing into the eyes, flush it with fresh water and obtain medical attention. Should not be injected. Please refer MSDS for more details.
This product should be stored in original containers in cool and dry place, away from sources of heat, flame and direct sunlight. Please refer Technical Data Sheet, Label and MSDS for more details and shelf life.
Poly Electrolyte Cationic is supplied in 25kgs packs.