Antiscalant
Antiscalant is designed for use with commercial and industrial membrane water treatment systems.
This wastewater treatment follows some below given steps
- A broad spectrum antiscalant designed to inhibit inorganic scale formation in membrane separation processes
- Inhibits calcium carbonate scale up to Calcium Carbonate Nucleation Index (CCNI) of 2.2
- Effectively inhibits formation of calcium sulfate, calcium fluoride, barium sulfate, strontium sulfate and silica
- Stabilizes metal ions to prevent metal oxides precipitation and disperses existing metal oxides/hydroxides, silt and clay particles
- Approved for use by all major membrane manufacturers
- Environmentally compatible, especially where discharge of waste into the environment is a concern


Ordering Information
- 5 Gallons (19 Liters) Bucket     (25 kg)
- 55 Gallons (208 Liters) Drum     (225 kg)
Typical Properties
- Appearance: Clear colorless to yellow liquid
- Odor: Characteristic
- Solubility in Water: Complete
- pH (as-is) @ 25°C: 3-4
- Specific Gravity: 1.10 ÷ 0.05
Safety and Handling
Store in a cool, dry place. In accordance with good safety practice, handle with care and avoid contact with eyes and prolonged or repeated contact with the skin. AS-102 is not considered a DOT Hazardous Material. For more information, see the Safety Data Sheet provided with the product.
Chemical Feeding & Control
Normally fed continuously prior to the final cartridge filter. It should be injected by chemical dosing pump from a dilution tank or directly from the drum to the feedwater line. The amount of AS-102 required to inhibit scale formation depends on the quality of the feed water and operational parameters of the membrane system. Refer to your membrane system operating manual, or consult with an Applied Membranes, Inc. water treatment technician for the specific control range and approximate dosage rate for your system.